Every VMBOX KVM VPS includes a dedicated public IPv4 address (and a dedicated IPv6), assigned exclusively to your server. Here are the networking details customers most often ask about before ordering.
Dedicated public IPv4
Each VMBOX VPS gets its own public IPv4, mapped 1:1 to your server in our IP management system. It is not shared and never behind CGNAT/NAT. A dedicated IPv6 address is included as well.
Static IP — survives reboots and reinstalls
Your IPv4 is static and reserved to your service. It stays the same across reboots, OS reinstallations and renewals; the address is re-applied automatically after an OS reinstall.
IP ranges & geolocation
VMBOX VPS in Sweden are served from dedicated datacenter/hosting ranges owned by Internetport Sweden AB (AS49770):
- 95.143.196.0/24
- 185.154.110.0/24
- 45.82.80.0/24
These are hosting ranges — not our fixed-line/broadband ranges — so VPS addresses are never mixed with residential/ISP customers. Geolocation is published via an RFC 8805 geofeed as Sweden (SE). You are welcome to check reputation and geolocation on these ranges before ordering, and on request we can provide the exact address that will be assigned to your order so you can vet it in advance.
IP replacement
If an assigned address has a demonstrable reputation or classification problem, we can reassign a different IPv4 from the pool on request.
No hidden limits
We do not impose per-connection, connection-rate or HTTP-request-rate caps. The only limits are the published ones: 1 Gbit/s port speed and your monthly bandwidth quota (inbound traffic is free — only outbound counts). High concurrent connection counts are fully supported.
WireGuard / VPN gateway
Running the VPS as a WireGuard (or other) VPN gateway is fully supported. UDP is unrestricted and IP forwarding/routing works, with no IP/MAC anti-spoof filtering on the VPS network interface — so both NAT (masquerade) and routed WireGuard setups work for forwarding peer traffic. The dedicated public IPv4 (plus IPv6) makes a clean VPN endpoint.
Note: the optional in-panel firewall defaults to deny-all. If you enable it, remember to allow your WireGuard UDP port and traffic forwarding.